NIRONE Device User Manual

Thank you for purchasing a NIRONE Device. This guide contains all the information you will need to use your NIRONE Device.

Spectral Engines’ NIRONE Sensors use patented Micro Electro Mechanical System (MEMS) Fabry-Perot Interferometer enabling fast and reliable measurements even in the most demanding environments. NIRONE Sensors work at the true near infrared (NIR) spectral range from 1350 to 2150 nm which means better sensitivity and specificity in material sensing applications. NIRONE Sensors offer excellent performance fully comparable to the best laboratory instruments in a small package and only a fraction of the cost.

The package includes:

  • NIRONE Device
  • USB-C cable
  • White Reference Target
  • The Device can be controlled through a PC by using our user-friendly SensorControl software.
  • A mobile phone application

Safety Instructions

Read these guidelines. Not following them may be dangerous or against local laws and regulations. For further info, please read the complete user guide.

Warning:

When you make measurements, ensure that the sample completely covers the NIRONE Device light source. The lamp can emit light near the infrared range. Risk of dazzling.

Warning:

The device may warm up during long uninterrupted use. Do not touch the device during long periods of use. Never use the device without its lens.

Warning:

The device contains a lens made of glass. This glass can break, if the device is dropped on a hard surface or receives a substantial impact. If the glass breaks, do not touch the glass parts or attempt to remove the broken glass from the device. Stop using the device until the glass is replaced by qualified service personnel. Please contact a distributor or dealer.

Warning:

Charge this battery only with a USB 2.0 compatible charger.

The battery is not changeable by a user, please contact your authorized dealer or distributor from whom you purchased the product if you need to replace the battery.

Do not keep or use this device in high temperature, humid environment or above 2000 m altitude. The operating temperatures are:

  • Operating temperature: +10 to +50 °C (+50 to +122 °F)
  • Charging temperature: 0 to +45 °C (+32 to +113 °F)
  • Storage temperature: -5 to +35 °C (+23 to +95 °F), non condensing
  • Maximum relative humidity 80 % for temperatures up to 31 °C decreasing linearly to 50 % relative humidity at 40 °C

If the battery has not been used for a long time, charge it before using it again.

Important:

The intended use of NIRONE Device is to measure spectra from various material. Do not use the device for anything other than its intended use.

Warning:

Your device and its accessories are not toys. They may contain small parts. Keep them out of reach of children.