Specifications — NIRONE Device

NIRONE Device has been designed for application developers for faster prototyping or final product development. With these advanced devices you can very easily finish developing your application and complete your measurements in an actual environment.

Technical Specifications

The table below contains technical specifications for NIRONE Device.

Table 1. NIRONE Device Technical Specifications

Parameters

Specifications

Ready-to-Scan operation

One button operation

Optical interface

Micro-reflection optics

Calibration of the device

Calibration done with White reference target.

Wavelength range

1.10 – 1.35 µm (NIRONE D1.4)

1.35 – 1.65 µm (NIRONE D1.7)

1.55 – 1.95 µm (NIRONE D2.0)

1.75 – 2.15 µm (NIRONE D2.2)

2.00 – 2.45 µm (NIRONE D2.5)

Wavelength resolution (typical, FWHM)

12 – 16 nm (D1.4) 1

13 – 17 nm (D1.7) 1

15 – 21 nm (D2.0) 1

16 – 22 nm (D2.2) 1

18 – 28 nm (D2.5) 1

Measurement time (full spectrum)

2 s

Wavelength temperature response (max.)

0.1 nm/°C

Wavelength points

Minimum step 0.1 nm, up to 512 in total

SNR (typical, w/o averaging)

> 15’000 (NIRONE 1.4) 2

> 11’000 (NIRONE 1.7) 2

> 7’500 (NIRONE 2.0 and 2.2) 2

> 1’500 (NIRONE 2.5) 2

Physical parameter

Specification

Outside dimensions

85 mm (L) x 85 mm (W) x 26 mm (H)

Weight

138 g

Durability

Specification

Surface glass

Gorilla-3

Lamp lifetime

> 40,000 hrs 3

IP rating

IP54

Electrical parameter

Specification

Battery

3.7 V, 700 mAh, rechargeable

Charging port

USB-C

Wireless connectivity

Bluetooth Low Energy BLE 4.3

Wired connectivity

USB 2.0

Illumination source

Two tungsten vacuum lamps

Detector type

Single element InGaAs (S1.4)

Single element extended InGaAs (from S1.7 to S2.5)

Software

Name

Device software

Upgradeable device firmware

Downloadable software

Name

PC software

SensorControl

Mobile application

Device Mobile App

Android 6.0 or later.

Certifications

Countries

Codes

CE

EU

2014/53/EU

FCC

USA

2AO6E

ISED

Canada

23742

MIC

Japan

204-610006

RCM

Australia and New Zealand

Bluetooth

FCC ID: XPYNINAB1

IC: 8595A-NINAB1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Maximum Power Output

In the European Union, NIRONE Device may operate within the following frequency band: 2.4 GHz. Maximum power output by design is indicated in parentheses: Bluetooth® (6 dBm).

Product Parts

The NIRONE Device product parts are depicted in the figure below:

Figure: Product Parts
Product Parts

The parts are:

  1. Device surface glass and sensor

  2. USB-C connector

  3. LED indicator for Bluetooth

  4. Scan button / Pairing button

  5. LED indicator for power

  6. ON / OFF button

  7. White reference target

1 With an SMA-adapter and a fiber with 400 um core and 0.22 NA.
2 With external illumination and signal level of 75% of the maximum range.
3 Specified by lamp manufacturer for ideal laboratory conditions. Lifetime may shorten as a result of shock, vibration, and extreme temperatures. Lifetime can be extended by using a lower than 100 % drive level.