Specifications — NIRONE Scanner
NIRONE Scanner has been designed for application developers for faster prototyping or final product development. With these advanced devices you can very easily finish developing your application and complete your measurements in an actual environment.
Technical Specifications
The table below contains technical specifications for NIRONE Scanner.
|
Parameters |
Specifications |
|---|---|
|
Ready-to-Scan operation |
One button operation |
|
Optical interface |
Micro-reflection optics |
|
Calibration of the device |
Calibration done with White reference target. |
|
Wavelength range |
1.10 – 1.35 µm (NIRONE D1.4) 1.35 – 1.65 µm (NIRONE D1.7) 1.55 – 1.95 µm (NIRONE D2.0) 1.75 – 2.15 µm (NIRONE D2.2) 2.00 – 2.45 µm (NIRONE D2.5) |
|
Wavelength resolution (typical, FWHM) |
12 – 16 nm (D1.4) 1 13 – 17 nm (D1.7) 1 15 – 21 nm (D2.0) 1 16 – 22 nm (D2.2) 1 18 – 28 nm (D2.5) 1 |
|
Measurement time (full spectrum) |
2 s |
|
Wavelength temperature response (max.) |
0.1 nm/°C |
|
Wavelength points |
Minimum step 0.1 nm, up to 512 in total |
|
SNR (typical, w/o averaging) |
> 15’000 (NIRONE 1.4) 2 > 11’000 (NIRONE 1.7) 2 > 7’500 (NIRONE 2.0 and 2.2) 2 > 1’500 (NIRONE 2.5) 2 |
|
Physical parameter |
Specification |
|
Outside dimensions |
80 mm (L) x 80 mm (W) x 25 mm (H) |
|
Weight |
138 g |
|
Durability |
Specification |
|
Surface glass |
Gorilla-3 |
|
Lamp lifetime |
> 40,000 hrs 3 |
|
IP rating |
IP54 |
|
Electrical parameter |
Specification |
|
Battery |
3.7 V, 700 mAh, rechargeable 1000 measurements on a single charge |
|
Charging port |
USB-C |
|
Wireless connectivity |
Bluetooth Low Energy BLE 4.3 |
|
Wired connectivity |
USB-C 2.0 |
|
Illumination source |
Two tungsten vacuum lamps |
|
Detector type |
Single element InGaAs (S1.4) Single element extended InGaAs (from S1.7 to S2.5) |
|
Software |
Name |
|
Device software |
Upgradeable device firmware |
|
Downloadable software |
Name |
|
PC software |
SensorControl |
|
Mobile application |
NIRONE Scanner Mobile App Android 7.0 or later, IOS 11+. |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions;
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Maximum Power Output
In the European Union, NIRONE Scanner may operate within the following frequency band: 2.4 GHz. Maximum power output by design is indicated in parentheses: Bluetooth® (6 dBm).
Product Parts
The NIRONE Scanner product parts are depicted in the figure below:
The parts are:
-
Sensor window
-
USB-C connector
-
LED indicator for Bluetooth / power
-
Pairing button
-
LED indicator for battery level / charging
-
ON / OFF button
-
White reference target